LOW VOLTAGE ALARM (WT-M9240102 Voltage Board)

Application:
Low battery voltage creeps up without warning and can endanger lives when life support systems, or even emergency lighting are in use.Further, drained voltage will damage good batteries quickly. There's not much room for error between dead batteries and an easily retrievable condition. Our LVA alerts you early and allows time for the appropriate action to be taken. Battery low voltage alarm warns of impending battery failure both visually and audibly.

Description:
The Kinequip Low Voltage Alarm is custom made to monitor 12 volt battery systems in specialty vehicles such as ambulances, which undergo rigourous use. Bright LED’s and an intermittent alarm is sounded to warn operator, based on battery condition.

Features:

* 85 dB Alert sounder built-in
* Installs in minutes
* Ready-to-go out-of-the-box
* Compact design

Electronic Products:

Electronic Main Page

TyreDog System

Specifications:
Dimensions: 4" L X 2" W X 1" H
Maximum Supply Voltage: 18V
Standby current consumption: ~22mA (@12V applied, alarm and latch off)
Maximum continuous output current: 0.5A (100°F Ambient) per output

Alarm:

Built-in LED indicator and external warning lamp output at 11.8V falling (± 0.05V)
Audible alarm and external output 120 seconds after trip (+30 sec, -0.0 sec tolerance)
Alarm and warning lamp reset at 12V rising (after warning/alarm state is active)
Outputs deliver supply voltage when active
Output protected against inductive kick-back

Latch:

De-bounced Input toggles latch state upon connecting input to ground

Built-in LED indicator
Output delivers supply voltage when active
Output protected against inductive kick-back